Designed for Fleet Operators, this kit comprises everything you need for a commercial vehicle installation
1) DC-2
The RoadHawk DC-2 forward facing camera is a lower cost plug-in replacement for the Roadhawk HD.  The camera offers up to 1080p resolution (scalable to 720p or 480p for longer record times), low light sensor, GPS receiver, G-force sensor, SDXC memory compatibility and image stabilisation, this camera offers very similar performance to the more expensive RoadHawk HD (now discontinued).

The camera works on a loop recording system, overwriting the oldest files as it records.  If it detects an impact, the camera creates an ‘event’ file.  Event files are not overwritten unless they exceed 40% of the capacity of the memory card, at which point the oldest file will be overwritten first.

2) Hardwire Kit
The hard wiring kit for the RoadHawk DC-2 in car camera system has a total of 5m of cable with an inline fuse. There is a filter box inline which reduces interference to and from the camera. Inside the filter box are components which will cut the power to the camera should the vehicle’s voltage drop reducing the risk of flattening the battery. You can connect this kit up to a permanent 12v to 32v supply (direct to the battery) or to a circuit on the ignition so the camera only powers up when the engine is running.

3) Locking Box
Prevents any user from removing the SD card or the power cable from the camera without using the supplied (universal) key.

4) 64GB SD Card 
A high capacity Class 10 SD Card with enough room for 9 to 18 hours Video footage on a loop, plus secure storage for 180 to 375 Event Files depending on camera resolution settings